Inspection After Disassembly

Case

Check the contact surfaces of the shift rod and bearing for wear and damage. If any is found, replace with a new one.

Fig 1: Identifying Inspection Areas

Courtesy of NISSAN NORTH AMERICA, INC.

Sleeve

Check the items below. If necessary, replace them with new ones.

Damage and excessive wear of the contact surfaces of the sprocket, mainshaft and sleeve.
Sleeve must move smoothly.

Fig 2: Checking Sleeve

Courtesy of NISSAN NORTH AMERICA, INC.

Gear, Shaft and Drive Chain

Check the items below. If necessary, replace them with new ones.

Fig 3: Identifying Inspection Points

Courtesy of NISSAN NORTH AMERICA, INC.

Bearing

Check the bearing for damage and rough rotation. If necessary, replace it with a new one.

Fig 4: Checking Bearing

Courtesy of NISSAN NORTH AMERICA, INC.