LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Frontier SL, 4WD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Component Testing (VQ40DE) >> ASCD Brake Switch >> Component Inspection >> ASCD Clutch Switch

ASCD Clutch Switch

  1. Turn ignition switch OFF.
  2. Disconnect ASCD clutch switch harness connector.
  3. Check harness continuity between ASCD clutch switch terminals 1 and 2 under the following conditions.
    Condition Continuity
    Clutch pedal: Fully released Should exist
    Clutch pedal: Slightly depressed Should not exist
    Fig 1: Checking ASCD Clutch Switch
    G08134270Courtesy of NISSAN NORTH AMERICA, INC.

    If NG, adjust ASCD clutch switch installation, refer to "ON-VEHICLE INSPECTION AND ADJUSTMENT ", and perform step  3 again.

scientia non olet · About LEMON Manuals