Rearview Camera Removal/Installation

WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

Remove the tailgate lower trim panel (see TRIM REMOVAL/INSTALLATION - TAILGATE AREA ).
Disconnect the rearview camera 6P connector (A), then remove the rearview camera cover and the rear license trim (see REAR LICENSE TRIM REPLACEMENT ).

Fig 1: Identifying 6P Connector And Rearview Camera
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the screws and the rearview camera (B).
Install the rearview camera in the reverse order of removal.