LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Cube Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Introduction (Except CALIFORNIA) >> System Description >> Diagnosis System (ECM) >> CONSULT Function >> Self Diagnostic Result Mode >> How to Erase DTC and 1st Trip DTC

How to Erase DTC and 1st Trip DTC

NOTE:
  • If the ignition switch stays ON after repair work, be sure to turn ignition switch OFF once. Wait at least 10 seconds and then turn it ON (engine stopped) again.
  • If the DTC is not for CVT related items (see "DTC Index "), skip step 1.
  1. Erase DTC in TCM. Refer to "DTC INDEX ".
  2. Select "ENGINE" with CONSULT.
  3. Select "SELF-DIAG RESULTS".
  4. Touch "ERASE". (DTC in ECM will be erased.)
scientia non olet · About LEMON Manuals