DTC Confirmation Procedure
- PRECONDITIONING
If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.
Which DTC is detected?
P0102 >> GO TO 2.
P0103 >> GO TO 3.
- PERFORM DTC CONFIRMATION PROCEDURE FOR DTC P0102
- Start engine and wait at least 5 seconds.
- Check DTC.
Is DTC detected?
YES >> Go to "DIAGNOSIS PROCEDURE ".
NO >> INSPECTION END
- PERFORM DTC CONFIRMATION PROCEDURE FOR DTC P0103-I
- Turn ignition switch ON and wait at least 5 seconds.
- Check DTC.
Is DTC detected?
YES >> Go to "DIAGNOSIS PROCEDURE ".
NO >> GO TO 4.
- PERFORM DTC CONFIRMATION PROCEDURE FOR DTC P0103-II
- Start engine and wait at least 5 seconds.
- Check DTC.
Is DTC detected?
YES >> Go to "DIAGNOSIS PROCEDURE ".
NO >> INSPECTION END