LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Cube Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P1212 To P2A00 (CALIFORNIA) >> DTC P1564: ASCD Steering Switch >> Component Inspection

Component Inspection

  1. CHECK ASCD STEERING SWITCH
    1. Disconnect combination switch (spiral cable) harness connector.
    2. Check the continuity between combination switch harness connector terminals under following conditions.
      Combination switch Condition Resistance
      Connector Terminals
      M302 13 and 16 MAIN switch: Pressed Approx. 0 Ω
      CANCEL switch: Pressed Approx. 250 Ω
      SET/COAST switch: Pressed Approx. 660 Ω
      RESUME/ACCELERATE switch: Pressed Approx. 1, 480 Ω
      All ASCD steering switches: Released Approx. 4, 000 Ω

      Is the inspection result normal? 

      YES >> INSPECTION END

      NO >> Replace ASCD steering switch. Refer to "EXPLODED VIEW ".

scientia non olet · About LEMON Manuals