Component Function Check

WARNING: This page is about a different variant/trim than selected.

CHECK OVERALL FUNCTION
With CONSULT
1. Start engine and warm it up to normal operating temperature.
2. Select "ENGINE MOUNTING" in "ACTIVE TEST" mode with CONSULT and touch "ON/OFF" on the CONSULT screen.
3. Check that the motor operating sound is heard from front electronic controlled engine mount and rear electronic controlled engine mount for about 0.5 seconds according to the switching condition of "ENGINE MOUNTING".
Without CONSULT
1. Make sure that gear position is P or N.
2. Start engine and let it idle.
3. Change the engine speed from idle to more than 1, 000 rpm and then return to idle (with vehicle stopped).
4. Check that the motor operating sound is heard from front electronic controlled engine mount for and rear electronic controlled engine mount about 0.5 seconds when changing engine speed.
  It is better to hear the operating sound around the left side front wheel house.
  
  Is the inspection result normal?
  
  YES: INSPECTION END
  
  NO: "DIAGNOSIS PROCEDURE ".