System Description
- The engine start function of remote keyless entry system is a system that makes it possible to start and stop the engine without removing the key. It verifies the electronic ID using two-way communications when pressing the push-button ignition switch while carrying the keyfob, which operates based on the results of electronic ID verification for keyfob using two-way communications between the keyfob and the vehicle.NOTE: The driver should carry the keyfob at all times.
- keyfob has 2 IDs [for keyfob and for NVIS (NATS)]. It can perform the door lock/unlock operation and the push-button ignition switch operation when the registered keyfob is carried.
- When the keyfob battery is discharged, it can be used as emergency back-up by inserting the keyfob to the key slot. At that time, perform the NVIS (NATS) ID verification. If it is used when the keyfob is carried, perform the keyfob ID verification.
- If the ID is successfully verified, and when push-button ignition switch is pressed, initiating the engine will be possible.
- If the door lock/unlock operation is performed when the keyfob battery is discharged, all doors lock/unlock can be performed by operating the driver door key cylinder using the mechanical key set in the keyfob.
- keyfob can be registered up to 4 keys (Including the standard keyfob) on request from the owner.NOTE:
- Refer to "INTELLIGENT KEY: SYSTEM DESCRIPTION " for any functions other than engine start function of remote keyless entry system.