LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Altima Base >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Removal And Installation >> EVAP Control System Pressure Sensor >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Remove rear stabilizer bar clamps and position rear stabilizer bar aside. Refer to REMOVAL AND INSTALLATION .
  2. Disconnect EVAP hose from EVAP canister.
  3. Disconnect EVAP control system pressure sensor.
  4. Remove EVAP control system pressure sensor and O-ring.
CAUTION: Discard the O-ring. Do not reuse O-ring.
scientia non olet · About LEMON Manuals