LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2011 >> Versa SL, 4D Hatchback >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT >> Service Information >> Shift Control System >> CVT Shift Selector Disassembly and Assembly >> Disassembly

CVT Shift Selector Disassembly and Assembly: Disassembly

NOTE: Refer to "REMOVAL AND INSTALLATION " to disassemble.
  1. Remove selector lever handle from CVT shift selector assembly. Refer to "SELECTOR LEVER HANDLE REMOVAL AND INSTALLATION ".
  2. Remove position lamp from position indicator plate (1).
  3. Insert a suitable tool to (A) (at 4 locations) as shownin illustration, and bend each hook slightly to raise position indicator plate (1) and remove from CVT shift selector assembly (2).
  4. Remove bracket from CVT shift selector assembly (2).
  5. Remove CVT shift selector harness connector from CVT shift selector assembly (2).
    Fig 1: Locating CVT Shift Selector Harness Connector And CVT Shift Selector Assembly
    G05915075Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Release tabs (A) on shift lock solenoid and park position switch assembly from hooks (B) on CVT shift selector assembly to shift lock solenoid and park position switch assembly.
    Fig 2: Locating Hooks And Tabs
    G06538585Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals