Inspection Procedure

WARNING: This page is about a different variant/trim than selected.

Turn ignition switch OFF.
Connect GST to data link connector (1), which is located under LH dash panel.

Fig 1: Identifying Data Link Connector Located Under LH Dash Panel
Courtesy of NISSAN MOTOR CO., U.S.A.
Turn ignition switch ON.
Enter the program according to instruction on the screen or in the operation service information.
(*: Regarding GST screens in this part, sample screens are shown in the illustration.)

Fig 2: Identifying GST Screen Display
Courtesy of NISSAN MOTOR CO., U.S.A.
Perform each diagnostic service according to each service procedure.
For further information , see the GST Operation Service Information of the tool maker.

Fig 3: GST Screen Display - Readiness Test
Courtesy of NISSAN MOTOR CO., U.S.A.