LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2011 >> Versa Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (CVT) >> Service Information >> P1745 Line Pressure Control >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different variant/trim than selected.
  1. CHECK DTC
    1. Turn ignition switch ON. (Do not start engine.)
    2. Select "SELF-DIAG RESULTS" mode for "TRANSMISSION" with CONSULT-III.
    3. Erase self-diagnostic results. Refer to "OBD-II DIAGNOSTIC TROUBLE CODE (DTC) ".
    4. Turn ignition switch OFF, and wait for 10 seconds or more.
    5. Start engine.
    6. Confirm self-diagnostic results again. Refer to "CONSULT-III FUNCTION (TRANSMISSION) ".

    Is the "P1745" displayed? 

    YES: Replace TCM. Refer to "REMOVAL AND INSTALLATION ".

    NO: INSPECTION END 

scientia non olet · About LEMON Manuals