LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2011 >> Versa Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Transaxle >> Service Information >> Control Unit (Ram), Control Unit (ROM) >> DTC Confirmation Procedure >> With Consult-III

With Consult-III

  1. Turn ignition switch ON and select "DATA MONITOR" mode for "TRANSMISSION" with CONSULT-III.
  2. Touch "START".
  3. Start engine.
  4. Run engine for at least 2 seconds at idle speed.
  5. If the check result is NG, go to "DIAGNOSIS PROCEDURE ".
scientia non olet · About LEMON Manuals