LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2011 >> Sentra SE-R >> Repair and Diagnosis (Single Page) >> Body & Frame >> Windows >> Glass, Window System & Mirrors >> Service Information >> Power Window System >> Front Power Window RH Circuit Inspection (Main Power Window and Door Lock/Unlock Switch Operation)

Front Power Window RH Circuit Inspection (Main Power Window and Door Lock/Unlock Switch Operation)

  1. CHECK MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH OUTPUT SIGNAL
    1. Disconnect front power window motor RH.
    2. Turn ignition switch ON.
    3. Check voltage between front power window motor RH connector and ground.
      VOLTAGE SPECIFICATIONS

      Connector Terminals Condition Voltage (V) (Approx.)
      (+) (-)
      D105 1 Ground UP 0
      DOWN Battery voltage
      3 UP Battery voltage
      DOWN 0
      Fig 1: Checking Voltage Between Front Power Window Motor RH Connector Terminals 1, 3 And Ground
      G05922835Courtesy of NISSAN MOTOR CO., U.S.A.

      OK or NG 

      OK: Replace front power window motor RH. Refer to "REMOVAL AND INSTALLATION ".

      NG: GO TO 2.

  2. CHECK FRONT POWER WINDOW MOTOR RH CIRCUIT
    1. Disconnect front power window motor RH and power window and door lock/unlock switch RH.
    2. Check continuity between power window and door lock/unlock switch RH connector D104 (A) terminals 6, 7 and front power window motor RH connector D105 (B) terminals 1, 3.

      7 - 3 : Continuity should exist. 

      6 - 1 : Continuity should exist. 

      Fig 2: Checking Continuity Between Power Window And Door Lock/Unlock Switch RH Connector And Ground
      G05922839Courtesy of NISSAN MOTOR CO., U.S.A.
    3. Check continuity between power window and door lock/unlock switch RH connector D104 (A) terminals 6, 7 and ground.

      6 - Ground : Continuity should not exist. 

      7 - Ground : Continuity should not exist. 

      OK or NG 

      OK: GO TO 3.

      NG: Repair or replace harness.

  3. CHECK POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH

    Check continuity between power window and door lock/unlock switch RH terminals.

    CONTINUITY SPECIFICATIONS

    Power window and door lock/unlock switch Terminals Continuity
    6 11 Yes
    7 12 Yes
    Fig 3: Checking Continuity Between Power Window And Door Lock/Unlock Switch RH Terminals
    G04927886Courtesy of NISSAN MOTOR CO., U.S.A.

    OK or NG 

    OK: GO TO 4.

    NG: Replace power window and door lock/unlock switch RH. Refer to "REMOVAL AND INSTALLATION ".

  4. CHECK GROUND SUPPLY CIRCUIT
    1. Disconnect main power window and door lock/unlock switch.
    2. Check continuity between main power window and door lock/unlock switch and power window connector (A) and door lock/unlock switch RH connector (B).
      CONTINUITY SPECIFICATIONS

      A B Continuity
      Connector Terminal Connector Terminal
      D5 11 D104 11 Yes
      8 12 Yes
      Fig 4: Checking Continuity Between Lock/Unlock Switch And Power Window Connector (A) And Door Lock/Unlock Switch Rh Connector
      G05922842Courtesy of NISSAN MOTOR CO., U.S.A.
    3. Check continuity between main power window and door lock/unlock switch connector (A) and ground.
      CONTINUITY SPECIFICATIONS

      A Ground Continuity
      Connector Terminal
      D5 11 No
      8 No

      OK or NG 

      OK: GO TO 5.

      NG: Repair or replace harness.

  5. CHECK MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH SIGNAL
    1. Connect main power window and door lock/unlock switch.
    2. Turn ignition switch ON.
    3. Check voltage between main power window and door lock/unlock switch connector and ground.
      VOLTAGE SPECIFICATIONS

      Connector Terminals Condition Voltage (V) (Approx.)
      (+) (-)
      D5 8 Ground UP Battery voltage
      DOWN 0
      11 UP 0
      DOWN Battery voltage
      Fig 5: Checking Voltage Between Main Power Window And Door Lock/Unlock Switch Connector Terminals 8, 11 And Ground
      G05922848Courtesy of NISSAN MOTOR CO., U.S.A.

      OK or NG 

      OK: Repair or replace harness.

      NG: Replace main power window and door lock/unlock switch. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals