Component Inspection (Cooling Fan Relay)

CHECK COOLING FAN RELAYS

Turn ignition switch OFF.
Remove cooling fan relay. For the relay number, refer to "WIRING DIAGRAM - ENGINE CONTROL SYSTEM - ". For the relay layout, refer to " ENGINE ROOM HARNESS ".
Check the continuity between cooling fan relay terminals under the following conditions.

CONTINUITY REFERENCE CHART

Terminals	Conditions	Continuity
3 and 5	12 V direct current supply between terminals 1 and 2	Existed
3 and 5	No current supply	Not existed

Fig 1: Checking Continuity Between Ignition Relay Terminals

Courtesy of NISSAN MOTOR CO., U.S.A.

Is the inspection result normal?

YES: INSPECTION END

NO: Replace cooling fan relay.