DTC P2004: Tumble Control Valve: Description: Notes

Tumble control valve (3) is installed in the intake manifold adapter (1).

Tumble control valve actuator (2) is connected to the front end of the valve shaft.

Tumble control valve actuator consists of motor and position sensor, etc.

The motor opens or closes the valve by the output signal of the ECM.

The sensor consists of a permanent magnet and Hall IC. It senses the valve shaft movement and feeds the voltage signals to the ECM.

Fig 1: Identifying Intake Manifold Adapter, Tumble Control Valve And Actuator Component Locations

Courtesy of NISSAN MOTOR CO., U.S.A.