LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2011 >> Quest SL >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security Control System >> DTC/Circuit Diagnosis >> DTC B260F: Engine Status >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

NOTE:
  • If DTC B260F is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "DTC LOGIC ".
  • If DTC B260F is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to "DTC LOGIC ".
DTC DETECTING CONDITION AND POSSIBLE CAUSES

DTC No. Trouble diagnosis name DTC detecting condition Possible cause
B260F ENG STATE SIG LOST BCM has not yet received the engine status signal from ECM when ignition switch is in the ON position.
  • Harness or connectors (CAN communication line is open or shorted.)
  • ECM
scientia non olet · About LEMON Manuals