LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2011 >> Murano SL, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 27 (Power Control System (CROSSCABRIOLET)) >> Power Distribution System >> DTC/Circuit Diagnosis >> Push-Button Ignition Switch >> Component Inspection

Component Inspection

WARNING: This page is about a different variant/trim than selected.
  1. CHECK PUSH-BUTTON IGNITION SWITCH
    1. Turn ignition switch OFF.
    2. Disconnect push-button ignition switch connector.
    3. Check continuity between push-button ignition switch terminals.
      CONTINUITY REFERENCE CHART

      Push-button ignition switch Condition Continuity
      Terminal
      1 4 Push-button ignition switch Pressed Existed
      Not pressed Not existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace push-button ignition switch.

scientia non olet · About LEMON Manuals