LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2011 >> Murano LE, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Power Window Control System (CROSSCABRIOLET)) >> Removal And Installation >> Power Window Main Switch >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the power window main switch finisher. Refer to , "REMOVAL AND INSTALLATION ".
  2. Power window main switch (1) is removed from power window main switch finisher (2) using a flat-bladed screw driver (A).
    NOTE: The same procedure is also performed for front power window switch (passenger side) and rear power window switch (LH & RH).
    Fig 1: Removing Power Window Main Switch Using Flat-Bladed Screw Driver
    G05728630Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals