ECM RECOMMENDATION FUNCTION : Special Repair Requirement

PERFORM ECM RECOMMENDATION FUNCTION
1. Install ECM.
2. Insert the registered Intelligent Key*, and turn ignition switch ON.
  *: To perform this step, use the key that has been used before performing ECM replacement.
3. Maintain ignition switch in the ON position for at least 5 seconds.
4. Turn ignition switch OFF.
5. Start engine.
  Can engine be started?
  
  YES: Procedure is completed.
  
  NO: Initialize BCM. Refer to CONSULT-III Operation Manual NATS-IVIS/NVIS.