Component Inspection

CHECK ASCD STEERING SWITCH

Check resistance between combination switch harness connector terminals as per the following.

RESISTANCE REFERENCE CHART

Combination switch	Condition	Resistance (Ω)
Terminals	Condition	Resistance (Ω)
13 and 16	MAIN switch: Pressed	Approx. 0
	CANCEL switch: Pressed	Approx. 250
	SET/COAST switch: Pressed	Approx. 660
	RESUME/ACCELERATE switch: Pressed	Approx. 1, 480
	All ASCD steering switches: Released	Approx. 4, 000

Fig 1: Checking Resistance Between Combination Switch Harness Connector Terminals

Courtesy of NISSAN MOTOR CO., U.S.A.

Is the inspection result normal?

YES >> INSPECTION END

NO >> Replace ASCD steering switch. Refer to "REMOVAL AND INSTALLATION ".