LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2011 >> Maxima S >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control System >> Removal And Installation >> BCM (Body Control Module) >> Removal and Installation >> Removal

Removal and Installation: Removal

CAUTION: Before replacing BCM, perform "READ CONFIGURATION" to save or print current vehicle specification. Refer to "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : SPECIAL REPAIR REQUIREMENT ".
  1. Remove the combination meter. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove the BCM screws (A) using a suitable tool, and pull out the BCM (1).
  3. Disconnect the BCM connector and remove the BCM (1).
    Fig 1: Removing BCM Screws Using Suitable Tool
    G06993541Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals