TRANSFER FLUID : Refilling

Remove filler plug (1) and gasket. Then fill oil up to mounting hole for the filler plug.
Oil and viscosity : Refer to , "FLUIDS AND LUBRICANTS ".

Oil capacity : Refer to "GENERAL SPECIFICATIONS ".

Fig 1: Checking That Oil Is Filled Up To Mounting Hole For Filler Plug
Courtesy of NISSAN MOTOR CO., U.S.A.

CAUTION: Carefully fill the oil. (Fill up for approximately 3 minutes.)
Leave the vehicle for 3 minutes, and check the oil level again.
Before installing filler plug, set a new gasket. Install filler plug on transfer and tighten to the specified torque. Refer to "EXPLODED VIEW ".
CAUTION: Never reuse gasket.