LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2011 >> Juke SV, 4WD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security Control System >> With Intelligent Key System >> DTC/Circuit Diagnosis >> DTC B2602: Shift Position >> Component Inspection

Component Inspection

  1. CHECK CVT SHIFT SELECTOR (DETENTION SWITCH)
    1. Turn ignition switch OFF.
    2. Disconnect CVT shift selector connector.
    3. Check continuity between CVT shift selector (detention switch) terminals.
      CONNECTOR TERMINALS CONTINUITY REFERENCE CHART

      CVT shift selector (detention switch) Condition Continuity
      Terminal
      12 13 Selector lever: P position Selector button: Released Not existed
      Selector button: Pressed Existed
      Selector lever: Except P position

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace CVT shift selector. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals