LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2011 >> Juke SL, 4WD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT >> DTC/Circuit Diagnosis >> Shift Position Indicator Circuit >> Component Function Check

Component Function Check

  1. CHECK SHIFT POSITION INDICATOR
    CAUTION: Always drive vehicle at a safe speed.
    1. Start engine.
    2. Check if correct selector lever position ("P", "N", "R" or "D") is displayed as selector lever is moved into each position.
    3. Drive vehicle in the manual mode, and confirm that the actual gear position and the meter's indication of the position mutually coincide when the selector lever is shifted to the "UP (+ side)" or "DOWN (+ side)" side (1st ← 6th gear).

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Go to , "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals