LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2011 >> Juke SL, 4WD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Control System >> Power Distribution System >> DTC/Circuit Diagnosis >> DTC B261A: Push-Button Ignition Switch >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PERFORM DTC CONFIRMATION PROCEDURE
    1. Press the push-button ignition switch under the following conditions, and wait for 1 second or more.

      CVT models 

      • Selector lever is in the P or N position
      • Do not depress brake pedal

      M/T models 

      • Do not depress clutch pedal
    2. Check "Self-diagnosis result" of BCM with CONSULT-III.

      Is DTC detected? 

      YES: Go to , "DIAGNOSIS PROCEDURE ".

      NO: INSPECTION END

scientia non olet · About LEMON Manuals