LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2011 >> Juke S, FWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security Control System >> With Intelligent Key System >> DTC/Circuit Diagnosis >> DTC B261F: ASCD Clutch Switch >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PERFORM DTC CONFIRMATION PROCEDURE
    1. Start the engine.
    2. Drive vehicle at a speed of 40 km/h (24.8 MPH) or more for 10 seconds.
    3. Decrease the vehicle speed to below 40 km/h (24.8 MPH).
    4. Repeat steps  2 and  3 twice (a total of 3 times).
    5. Check DTC in "Self Diagnostic Result" mode of "BCM" using CONSULT-III.

      Is DTC detected? 

      YES: Go to , "DIAGNOSIS PROCEDURE ".

      NO: INSPECTION END

scientia non olet · About LEMON Manuals