Selective Unlock Function

• When an LOCK signal is transmitted from keyfob, all doors are locked.
• When an UNLOCK signal is transmitted from keyfob once, driver side door is unlocked.
• Then, if an UNLOCK signal is transmitted from keyfob again, all other doors are unlocked.

How to change selective unlock mode. 

With CONSULT-III 

Selective unlock mode can be set to ON or OFF using CONSULT-III.

Refer to "DOOR LOCK : CONSULT-III FUNCTION (BCM - DOOR LOCK) ".

Without CONSULT-III 

• ON/OFF can be switched when keyfob lock button and unlock button are pressed simultaneously for 5 seconds or more while steering lock is locked.
• When mode is switched, hazard warning lamp blinks.

OFF → ON : 3 blinks

ON → OFF : 1 blink