Operation Condition

Operation condition of warning and information is as per the following table.

OPERATION CONDITION CHART

Warning/Information functions

Operation procedure

Intelligent Key system malfunction

A malfunction is detected on BCM and key warning lamp turns ON

OFF position warning

For internal

Ignition switch: ACC position
Door switch (driver side): ON (Door is open)

For external⁽¹⁾

OFF position warning (For internal) is in active mode, driver side door is closed

NOTE: OFF position warning (for external) operates only when driver door is closed after each of P position warning, ACC warning, and OFF position warning (internal) sounds.

P position warning⁽¹⁾

For internal

Shift position: Except P position
Engine is running to stopped (Ignition switch is ON to OFF)

For external

P position warning (For internal) operates
Door switch: ON to OFF (Door is open to close)
Intelligent Key cannot be detected inside the vehicle

ACC warning⁽¹⁾

After P position warning operates, or when ignition switch is turned ON immediately after P position warning operates
Ignition switch: ACC position

Take away warning

Door status changes from open to close

Ignition switch: Except LOCK position
Door switch: ON to OFF (Door is open to close)
Registered Intelligent Key is not detected inside the vehicle

Door status is open

Door switch: ON (Door is open)
Registered Intelligent Key is not detected inside the vehicle during Key ID verification for 5 seconds

Push button-ignition switch operation

Ignition switch: Except LOCK position
Press push-button ignition switch
Registered Intelligent Key is not detected inside the vehicle

Door lock operation warning

When door lock operation is requested while door lock operating condition of door request switch not satisfied

Engine start information

Ignition switch is ON position

Ignition switch: ON position
Shift position: P position⁽¹⁾
Engine is stopped

Ignition switch is except ON position

Ignition switch: Except ON position
Shift position: P position⁽¹⁾
Intelligent Key can be detected inside the vehicle

Intelligent Key low battery warning

BCM detects that Intelligent Key is low battery, after ignition switch is turned ON

Key ID warning

Push-button ignition switch is pressed
Registered Intelligent Key is not detected inside the vehicle

⁽¹⁾	M/T models do not apply.