LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2011 >> Juke S, FWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Body Control System >> Without Intelligent Key System >> Basic Inspection >> Additional Service When Replacing Control Unit >> Description >> After Replacement

After Replacement

CAUTION:
  • When replacing BCM, you must perform "WRITE CONFIGURATION" with CONSULT-III.
    • Complete the procedure of "WRITE CONFIGURATION" in order.
    • If you set incorrect "WRITE CONFIGURATION", incidents might occur.
    • Configuration is different for each vehicle model. Confirm configuration of each vehicle model.
  • When replacing BCM, perform the system initialization (NATS).
scientia non olet · About LEMON Manuals