LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2011 >> Frontier SL, 4WD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Component Testing (VQ40DE) >> Ignition Signal >> Component Inspection >> Condenser-1

Component Inspection: Condenser-1

  1. Turn ignition switch OFF.
  2. Disconnect condenser-1 harness connector.
  3. Check resistance between condenser-1 terminals 1 and 2.
    RESISTANCE REFERENCE CHART

    Resistance Above 1 MΩ at 25°C (77°F)
    Fig 1: Checking Resistance Between Condenser-1 Terminals 1 And 2
    G07121486Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals