LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2011 >> Frontier SL, 4WD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Component Testing (VQ40DE) >> ASCD Brake Switch >> Component Inspection >> ASCD Clutch Switch

ASCD Clutch Switch

  1. Turn ignition switch OFF.
  2. Disconnect ASCD clutch switch harness connector.
  3. Check harness continuity between ASCD clutch switch terminals 1 and 2 under the following conditions.
    CONTINUITY REFERENCE CHART

    Condition Continuity
    Clutch pedal: Fully released Should exist
    Clutch pedal: Slightly depressed Should not exist

    If NG, adjust ASCD clutch switch installation, refer to "ON-VEHICLE INSPECTION AND ADJUSTMENT ", and perform step  3 again.

    Fig 1: Checking Harness Continuity Between ASCD Clutch Switch Terminals 1 And 2
    G07121456Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals