LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2011 >> Cube Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTC P0507 Through DTC P2A00 (For CALIFORNIA) >> DTC P1212: TCS Communication Line >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PRECONDITIONING

    TESTING CONDITION: 

    Before performing the following procedure, confirm that battery voltage is more than 10.5V at idle. 

    Go to 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE
    1. Start engine and let it idle for at least 10 seconds.
    2. Check 1st trip DTC.

      Is 1st trip DTC detected? 

      YES: Go to "DIAGNOSIS PROCEDURE ".

      NO: INSPECTION END

scientia non olet · About LEMON Manuals