LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2011 >> Altima SL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 51 (Body Control System (Hybrid)) >> Removal And Installation >> BCM (Body Control Module) >> Removal and Installation >> Installation

Removal and Installation: Installation

WARNING: This page is about a different variant/trim than selected.

Installation is in the reverse order of removal.

CAUTION:
  • When replacing BCM, perform "WRITE CONFIGURATION". Refer to "CONFIGURATION (BCM) : SPECIAL REPAIR REQUIREMENT ".
  • When replacing BCM, perform the system initialization (NATS). Refer to the CONSULT-III operation instructions for the initialization procedure.
  • When replacing BCM, if new BCM does not come with keyfobs attached, all existing keyfobs must be re-registered. Refer to the CONSULT-III operation instructions for the initialization procedure.
scientia non olet · About LEMON Manuals