Step Motor

Turn ignition switch OFF.
Disconnect CVT unit harness connector.

Check resistance between CVT unit harness connector terminals and ground.

CONNECTOR TERMINAL RESISTANCE CHART

Name	Connector	Terminal	Resistance (Approx.)
Step motor	F46	6 - 7	30 Ω
		8 - 9	30 Ω
		6 - Ground	15 Ω
		7 - Ground
		8 - Ground
		9 - Ground

Fig 1: Checking Resistance Between CVT Unit Harness Connector Terminals And Ground

G04916203

Courtesy of NISSAN MOTOR CO., U.S.A.

If NG, perform "SELF-DIAG RESULTS" mode for "TRANSMISSION".