LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2010 >> Sentra SE-R >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Continuously Variable Transmission (CVT) >> Service Information >> On Board Diagnostic (OBD) System >> OBD-II Diagnostic Trouble Code (DTC) >> How To Erase DTC (With GST)

How To Erase DTC (With GST)

  1. If the ignition switch stays ON after repair work, be sure to turn ignition switch OFF once. Wait at least 10 seconds and then turn it ON (engine stopped) again.
  2. Select Mode 4 with GST (Generic Scan Tool). For details, refer to "GENERIC SCAN TOOL (GST) FUNCTION ".
scientia non olet · About LEMON Manuals