Wheel Alignment
WHEEL ALIGNMENT SPECIFICATION
| Item | Standard | ||||||
|---|---|---|---|---|---|---|---|
| Axle type | 2WD | 4WD | |||||
| Tire size | 215/70R16 | 225/60R17 | 215/70R16 | 225/60R17 | |||
| Camber Degree minute (Decimal degree) |
Minimum | Left side | -1° 00' (-1.00°) | ||||
| Right side | -1° 15' (-1.25°) | ||||||
| Nominal | Left side | -0° 15' (-0.25°) | |||||
| Right side | -0° 30' (-0.50°) | ||||||
| Maximum | Left side | 0° 30' (0.50°) | |||||
| Right side | 0° 15' (0.25°) | ||||||
| Left and right difference | 0° 33' (0.55°) or less | ||||||
| Caster Degree minute (Decimal degree) |
Minimum | 3° 55' (3.92°) | 4° 00' (4.00°) | ||||
| Nominal | 4° 40' (4.67°) | 4° 45' (4.75°) | |||||
| Maximum | 5° 25' (5.41°) | 5° 30' (5.50°) | |||||
| Left and right difference | 0° 36' (0.60°) or less | ||||||
| Kingpin inclination Degree minute (Decimal degree) |
Minimum | 9° 45' (9.75°) | |||||
| Nominal | 10° 30' (10.50°) | ||||||
| Maximum | 11° 15' (11.25°) | ||||||
| Toe-in | Total toe-in Distance |
Minimum | In 1 mm (0.04 in) | ||||
| Nominal | In 2 mm (0.08 in) | ||||||
| Maximum | In 3 mm (0.12 in) | ||||||
| Toe angle (left wheel or right wheel) Degree minute (Decimal degree) |
Minimum | In 0° 02' 30' (0.05°) | |||||
| Nominal | In 0° 05' (0.08°) | ||||||
| Maximum | In 0° 07' 30' (0.12°) | ||||||
Measure value under unladen* conditions.
*: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.