Symptom Table
WARNING: This page is about a different car, the 2009 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
The engine start function, door lock function, power distribution system and NATS-IVIS/NVIS in the Intelligent Key system are closely related to each other regarding control. Narrow down the functional area in question by performing following table to identify which function is malfunctioning. The vehicle security function can operate only when the door lock and power distribution system are operating normally. Therefore, it is easy to identify any factor unique to the vehicle security system by performing following table.
Use the chart below to help you find the cause of the symptom. The numbers indicate the order of the inspection.
NOTE:
Before starting vehicle security system operation check, the following condition are met.
- Open front windows
- Turn ignition switch OFF
- Pull out key fob from key slot.
SYMPTOM CHART
| NO. | Function | Operation condition | Symptom | Diagnostic Item | Reference |
|---|---|---|---|---|---|
| 1 | POWER DISTRIBUTION FUNCTION | Press push-button ignition switch under the following condition.
|
Push-button ignition switch is not operated | - | PUSH-BUTTON IGNITION SWITCH DOES NOT OPERATE |
| 2 | NISSAN VEHICLE IMMOBILIZER SYSTEM-NATS FUNCTION | Start engine with key fob into the key slot. | Engine can not start (key fob into the key slot) | - | ENGINE DOES NOT START WHEN KEY FOB IS INSERTED INTO KEY SLOT |
| Open the door after ignition switch turn ON to OFF. | Steering is not locked | - | STEERING DOES NOT LOCK | ||
| Insert key fob into the key slot. | Key slot indicator is not illuminate | - | KEY SLOT INDICATOR DOES NOT ILLUMINATE | ||
| 3 | VEHICLE SECURITY SYSTEM | Lock all doors with key fob | Vehicle security system can not be set | Key fob | VEHICLE SECURITY SYSTEM CAN NOT BE SET |
| Lock all doors with door key cylinder | Door key cylinder | VEHICLE SECURITY SYSTEM CAN NOT BE SET | |||
| Lock all doors with key fob | Security indicator does not turn ON | - | SECURITY INDICATOR DOES NOT TURN ON | ||
| In the armed phase, open the door | Vehicle security alarm does not activate | - | VEHICLE SECURITY ALARM DOES NOT ACTIVATE | ||
| When alarm sound, press key fob button | Vehicle security system can not be canceled | Key fob | VEHICLE SECURITY SYSTEM CAN NOT CANCELED | ||
| When alarm sound, operate door key cylinder | Door key cylinder | VEHICLE SECURITY SYSTEM CAN NOT CANCELED | |||
| 4 | POWER DISTRIBUTION FUNCTION | Press push-button ignition switch under the following condition.
|
Push-button ignition switch position indicator does not turn on | - | PUSH-BUTTON IGNITION SWITCH POSITION INDICATOR DOES NOT ILLUMINATE |