LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2010 >> Murano SL, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 168 (Engine Control System - Introduction) >> Function Diagnosis >> Cooling Fan Control >> System Description >> Input/Output Signal Chart

Input/Output Signal Chart

WARNING: This page is about a different car, the 2009 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
INPUT/OUTPUT SIGNAL CHART

Sensor Input signal to ECM ECM function Actuator
Crankshaft position sensor (POS)
Camshaft position sensor (PHASE)
Engine speed(1) Cooling fan control IPDM E/R
โ†“
Cooling fan relay
โ†“
Cooling fan motor
Battery Battery voltage(1)
Combination meter Vehicle speed(2)
Engine coolant temperature sensor Engine coolant temperature
BCM Air conditioner ON signal(2)
Refrigerant pressure sensor Refrigerant pressure
(1) The ECM determines the start signal status by the signals of engine speed and battery voltage.
(2) This signal is sent to ECM through CAN communication line.