Component Inspection

CHECK FUEL TANK TEMPERATURE SENSOR

Check resistance between "fuel level sensor unit and fuel pump" terminals by heating with hot water as shown in the figure.

TERMINAL RESISTANCE CHART

Terminals	Condition		Resistance
4 and 5	Temperature [°C (°F)]	20 (68)	2.3 - 2.7 kΩ
4 and 5	Temperature [°C (°F)]	50 (122)	0.79 - 0.90 kΩ

Fig 1: Checking Resistance Between "Fuel Level Sensor Unit And Fuel Pump" Terminals

Courtesy of NISSAN MOTOR CO., U.S.A.

Is the inspection result normal?

YES: INSPECTION END

NO: Replace "fuel level sensor unit and fuel pump".