ACC Switch Check
- CHECK ACC SWITCH
With CONSULT-III
Check ACC switch ("ACC ON SW") in "DATA MONITOR" mode with CONSULT-III.
DATA MONITOR REFERENCEMonitor item Condition ACC ON SW Ignition switch position is ACC or ON : ON Ignition switch position is OFF : OFF Without CONSULT-III
Check voltage between BCM connector and ground.
TERMINALS VOLTAGE REFERENCETerminals Ignition switch condition Voltage (V) (Approx). (+) (-) BCM connector Terminal M18 11 Ground ACC or ON Battery voltage OFF 0 OK or NG
OK : ACC switch is OK.
NG : Check the following.
- 10A fuse [No. 20, located in fuse block (J/B)]
- Harness for open or short between BCM and fuse.