Control Valve Upper Body: Assembly: Notes

CAUTION:

Apply ATF to all components before installation.
Lay control valve body down when installing valves. Do not stand control valve body upright.

Fig 1: Identifying Control Valve Installation Positions

Courtesy of NISSAN MOTOR CO., U.S.A.

Lubricate control valve body and all valves with ATF. Install control valves by sliding them carefully into their bores.

CAUTION:

Fig 2: Sliding Control Valves Into Bores

Courtesy of NISSAN MOTOR CO., U.S.A.

Wrap a small flat-bladed screwdriver A with vinyl tape and use it to insert valves into their proper positions.

Fig 3: Inserting Valves
Courtesy of NISSAN MOTOR CO., U.S.A.
Install retainer plates (1).

While pushing plug or return spring, install retainer plate (1) using a flat-bladed screwdriver A.

Fig 4: Pushing Retainer Plate With Screwdriver
Courtesy of NISSAN MOTOR CO., U.S.A.