LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2009 >> Versa Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P0500 To P2A00 >> DTC P0850 PNP Switch >> Overall Function Check >> With GST

With GST

  1. Turn ignition switch ON.
  2. Check voltage between ECM terminal 69 (PNP switch signal) and ground under the following conditions.
    VOLTAGE REFERENCE CHART

    Condition (Shift lever) Voltage V (Known-good data)
    P or N position (A/T, CVT)
    Neutral position (M/T)    		 Approx. 0
    Except above BATTERY VOLTAGE (11 - 14V)
  3. If NG, go to "DIAGNOSIS PROCEDURE ".
    Fig 1: Checking Voltage Between ECM Terminal 69 (PNP Switch Signal) And Ground
    G04925504Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals