CAN Communication Inspection Using CONSULT-III (Self-Diagnosis)

SELF-DIAGNOSTIC RESULT CHECK

NOTE: If CONSULT-III is used with no connection of CONSULT-III CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carries out CAN communication.

Connect CONSULT-III and CONSULT-III CONVERTER, and select "BCM" on "SELECT SYSTEM" screen.
Select "BCM" on "SELECT TEST ITEM" screen, and select "SELF-DIAG RESULTS".

Check display content in self-diagnostic results.

SELF-DIAGNOSTIC RESULT CHART

CONSULT-III display code	Diagnosis item
U1000	INITIAL DIAG
	TRANSMIT DIAG
	ECM
	IPDM E/R
	METER/M & A
	I-KEY

Contents displayed

No malfunction >> Inspection End

Malfunction in CAN communication system >> After printing the monitor items, go to "CAN System". Refer to "CAN FUNDAMENTAL ".