Disassembly and Assembly: Assembly

WARNING: This page is about a different variant/trim than selected.

Press in differential side bearing (transaxle case side) to differential case using Tools.
Tool number

: KV38102510 ( - )

: ST30720000 (J-25405)

Fig 1: Pressing Differential Side Bearing
Courtesy of NISSAN MOTOR CO., U.S.A.

CAUTION: Replace differential side bearing and differential side bearing outer race as a set.
Align and install speedometer drive gear onto differential case.

Fig 2: Aligning And Installing Speedometer Drive Gear Onto Differential Case
Courtesy of NISSAN MOTOR CO., U.S.A.
Press in differential side bearing (clutch housing side) to differential case using Tools.
Tool number

A: ST30720000 (J-25405)

B: KV38102510 ( - )
CAUTION:
- Do not reuse differential side bearing and differential side bearing outer race.
- Replace differential side bearing and differential side bearing outer race as a set.
  
  Fig 3: Installing Differential Side Bearing (Clutch Housing Side)
  Courtesy of NISSAN MOTOR CO., U.S.A.
Install final gear into differential case and tighten final gear bolts to the specified torque. Refer to "DISASSEMBLY AND ASSEMBLY ".

Fig 4: Locating Differential Case Bolts
Courtesy of NISSAN MOTOR CO., U.S.A.