LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2009 >> Quest Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS U0101 To P0153 >> DTC P0112, P0113 IAT Sensor >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. If DTC Confirmation Procedure has been previously conducted, always perform the following before conducting the next step.
    1. Turn ignition switch OFF and wait at least 10 seconds.
    2. Turn ignition switch ON.
    3. Turn ignition switch OFF and wait at least 10 seconds.
  2. Turn ignition switch ON.
  3. Wait at least 5 seconds.
  4. Check 1st trip DTC.
  5. If 1st trip DTC is detected, go to , "DIAGNOSIS PROCEDURE ".
scientia non olet · About LEMON Manuals