LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2009 >> Quest Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P1211 To P2A03 >> DTC P1402 EGR Function >> DTC Confirmation Procedure >> With Consult-III

With Consult-III

  1. Turn ignition switch OFF, and wait at least 10 seconds, and then turn ON.
  2. Select "EGR SYSTEM P1402" of "EGR SYSTEM" in "DTC WORK SUPPORT" mode with CONSULT-III.
  3. Touch "START".
  4. Start engine and let it idle until "TESTING" on CONSULT-III screen is turned to "COMPLETED". (It will take 80 seconds or more.)

    If "TESTING" is not displayed after 5 minutes, turn ignition OFF and cool the engine coolant temperature to the range of -10 to 50°C (14 to 122°F). Retry from step 1. 

  5. Make sure that "OK" is displayed after touching "SELF-DIAG RESULTS". If "NG" is displayed, refer to , "DIAGNOSIS PROCEDURE ".
scientia non olet · About LEMON Manuals