LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2009 >> Quest Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P0447 To P1168 >> DTC P0462, P0463 Fuel Level Sensor >> DTC Confirmation Procedure

DTC Confirmation Procedure

NOTE: If DTC Confirmation Procedure has been previously conducted, always perform the following before conducting the next step.
  1. Turn ignition switch OFF and wait at least 10 seconds.
  2. Turn ignition switch ON.
  3. Turn ignition switch OFF and wait at least 10 seconds.

TESTING CONDITION: 

Before performing the following procedure, confirm that battery voltage is more than 11 V at ignition switch ON. 

  1. Turn ignition switch ON.
  2. Wait at least 5 seconds.
  3. Check 1st trip DTC.
  4. If 1st trip DTC is detected, go to , "DIAGNOSIS PROCEDURE ".
scientia non olet · About LEMON Manuals