LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2009 >> Murano SL, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P0455 To P1421 >> P0605 ECM >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PRECONDITIONING

    If DTC Confirmation Procedure has been previously conducted, always perform the following before conducting the next test.

    1. Turn ignition switch OFF and wait at least 10 seconds.
    2. Turn ignition switch ON.
    3. Turn ignition switch OFF and wait at least 10 seconds.

      GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE FOR MALFUNCTION A
    1. Turn ignition switch ON.
    2. Check 1st trip DTC.

      Is 1st trip DTC detected? 

      YES: Go to "DIAGNOSIS PROCEDURE ".

      NO: GO TO 3.

  3. PERFORM DTC CONFIRMATION PROCEDURE FOR MALFUNCTION B
    1. Turn ignition switch ON and wait at least 1 second.
    2. Turn ignition switch OFF, wait at least 10 seconds, and then turn ON.
    3. Check 1st trip DTC.

      Is 1st trip DTC detected? 

      YES: Go to "DIAGNOSIS PROCEDURE ".

      NO: GO TO 4.

  4. PERFORM DTC CONFIRMATION PROCEDURE FOR MALFUNCTION C
    1. Turn ignition switch ON and wait at least 1 second.
    2. Turn ignition switch OFF, wait at least 10 seconds, and then turn ON.
    3. Repeat step  2 for 32 times.
    4. Check 1st trip DTC.

      Is 1st trip DTC detected? 

      YES: Go to "DIAGNOSIS PROCEDURE ".

      NO: INSPECTION END

scientia non olet · About LEMON Manuals