Component Inspection

1. Disconnect main power window and door lock/unlock switch connectors.
2. Check continuity between main power window and door lock/unlock switch (lock operation).
   CONTINUITY SPECIFICATION
   
   

   Terminal		Main power window and door lock/unlock switch condition		Continuity
   3	17	Rear LH	UP	No
   5		Rear RH
   1		Rear LH	NEUTRAL
   3
   5		Rear RH
   7
   1		Rear LH	DOWN
   7		Rear RH

   Fig 1: Checking Continuity Between Main Power Window And Door Lock/Unlock Switch

   Courtesy of NISSAN MOTOR CO., U.S.A.
3. Check continuity between main power window and door lock/unlock switch (unlock operation).

Fig 2: Checking Continuity Between Main Power Window And Door Lock/Unlock Switch

Courtesy of NISSAN MOTOR CO., U.S.A.

Is the inspection result normal? 

YES: Inspection End.

NO: Replace main power window and door lock/unlock switch. Refer to "REMOVAL AND INSTALLATION ".